Adjusting default settings


Ivy comes bundled with some default settings which makes it pretty simple to use in common environment. This tutorial, which is close to a reference documentation, explains what are those default settings and how they can be adjusted to your needs.

To fully understand the concept of settings and what you can do with them, we suggest reading other tutorial related to settings (like Multiple Resolvers and Dual Resolver) or the Settings Files reference documentation.

Concept

This default settings mainly consist of 3 kind of repositories:
  • local
  • a repository which is private to the user.
  • shared
  • a repository which is shared between all the member of a team
  • public
  • a public repository on which most modules, and especially third party modules, can be found
Note that if you work alone, the distinction between local and shared repository is not very important, but there are some things to know to distinguish them.

Now let's describe each of these repositories concept in more details. We will describe how they are setup physically later.

Local

The local repository is particularly useful when you want to do something without being disturbed by anything else happening in the environment. This means that whenever ivy is able to locate a module in this repository it will be used, no matter of what is available in others.

For instance, if you have a module declaring a dependency on the module foo in revision latest.integration, then if a revision of foo is found in the local repository, it will be used, even if a more recent revision is available in other repositories.

This may be disturbing for some of you, but imagine you have to implement a new feature on a project, and in order to achieve that you need to modify two modules: you add a new method in module foo and exploit this new method in module bar. Then if you publish the module foo to your local repository, you will be sure to get it in your bar module, even if someone else publish a new revision of foo in the shared repository (this revision not having the new method you are currently adding).

But be careful, when you have finished your development and publish it on the shared you will have to clean your local repository to benefit from new versions published in the shared repository.

Note also that modules found in the local repository must be complete, i.e. they must provide both a module descriptor and the published artifacts.

Shared

As its name suggest, the shared repository is aimed to be shared among a whole development team. It is a place where you can publish your team private modules for instance, and it's also a place where you can put modules not available in the public repository (sun jars, for instance), or simply not accurate (bad or incomplete module descriptors for instance).

Note that modules can be split across the shared repository and the public one: you can have the module descriptor in the shared repository and the artifacts in the public one, for instance.

Public

The public repository is the place where most modules can be found, but which sometimes lack the information you need. It's usually a repository available through an internet connection only, even if this is not mandatory.

Setting up the repositories

Now that we have seen the objective of each of the three repositories, let's see how they are setup and how to configure them to fit your needs.

First, several repositories uses the same root in your filesystem. Referenced as ${ivy.default.ivy.user.dir}, this is by default the directory .ivy2 in your user home.

Note that several things can be done by setting ivy variable. To set them without defining your own ivysettings.xml file, you can:
  • set an ant property before any call to ivy in your build file if you use ivy from ant
  • set an environment variable if you use ivy from the command line
For instance:
<target name="resolve">
<property name="ivy.default.ivy.user.dir" value="/path/to/ivy/user/dir"/>
<ivy:resolve />
</target>
Now we will show how to override default values for the different kind of repositories, note that you can find what are these default values below in the detail of the default settings.

Local

By default, the local repository lies in ${ivy.default.ivy.user.dir}/local. This is usually a good place, but you may want to modify it however. No problem, you just have to set the following ivy variable to the directory you want to use:
ivy.local.default.root
. For instance:
ivy.local.default.root=/opt/ivy/repository/local
.

If you already have something you would like to use as your local repository, you may also want to modify the layout of this repository. Once again, two variables are available for that:
ivy.local.default.ivy.pattern
gives the pattern to find ivy files
ivy.local.default.artifact.pattern
gives the pattern to find artifacts
For example:
ivy.local.default.root=/opt/ivy/repository/local
ivy.local.default.ivy.pattern=[module]/[revision]/ivy.xml
ivy.local.default.artifact.pattern=[module]/[revision]/[artifact].[ext]

Shared

By default, the shared repository lies in ${ivy.default.ivy.user.dir}/shared. This is fine if you work alone, but the shared repository is supposed to be, mmm, shared! So changing this directory is often required, and it is usually modified to point to a network shared directory. You can use
ivy.shared.default.root
variable to specify in a new directory. Moreover, you can also configure the layout with variables similar to the one for the local repository:
ivy.shared.default.ivy.pattern
gives the pattern to find ivy files
ivy.shared.default.artifact.pattern
gives the pattern to find artifacts
For example:
ivy.shared.default.root=/opt/ivy/repository/shared
ivy.shared.default.ivy.pattern=[organisation]/[module]/[revision]/ivy.xml
ivy.shared.default.artifact.pattern=[organisation]/[module]/[revision]/[artifact].[ext]

Public

By default, the public repository is ibiblio in m2 compatible mode (in other words, the maven 2 public repository).

This repository has the advantage of providing a lot of modules, with metadata for most of them. The quality of metadata is not always perfect, but it's a very good start to use a tool like Ivy and benefit from the power of transitive dependency management.

Despite its ease of use, we suggest reading the Best practices to have a good understanding of the pros and cons of using a public unmanaged repository before depending on such a repository for your enterprise build system.

In 1.4 version Ivy was using ivyrep has default resolver, if you want to restore this, set
ivy.14.compatible=true as an ant property


Going further

OK, so we have seen how to easily change the settings of the three main repositories. But what if my shared repository is on a web server? What if you don't want to use maven 2 repository as public repository? What if ...

No problem, Ivy is very flexible and be configured with very specific settings to match your needs and environment. But before considering writing your own settings from scratch, we suggest reading the following where you will learn how to leverage a part of the default settings and adjust the rest.

But before explaining how, you will need to have a quick overview of how ivy is configured by default.

By default, ivy is configured using an ivysettings.xml which is packaged in the ivy jar. Here is this settings file:
<ivysettings>
<settings defaultResolver="default"/>
<include url="${ivy.default.settings.dir}/ivysettings-public.xml"/>
<include url="${ivy.default.settings.dir}/ivysettings-shared.xml"/>
<include url="${ivy.default.settings.dir}/ivysettings-local.xml"/>
<include url="${ivy.default.settings.dir}/ivysettings-main-chain.xml"/>
<include url="${ivy.default.settings.dir}/ivysettings-default-chain.xml"/>
</ivysettings>
OK, so not much info here, except a lot of inclusions. These inclusions have been done on purpose so that you can easily change only one part of the ivysettings and benefit of the rest easily. For example, if you want to define your own public resolver, you will just have to configure ivy with an ivysettings like that:
<ivysettings>
<settings defaultResolver="default"/>
<include url="http://myserver/ivy/myivysettings-public.xml"/>
<include url="${ivy.default.settings.dir}/ivysettings-shared.xml"/>
<include url="${ivy.default.settings.dir}/ivysettings-local.xml"/>
<include url="${ivy.default.settings.dir}/ivysettings-main-chain.xml"/>
<include url="${ivy.default.settings.dir}/ivysettings-default-chain.xml"/>
</ivysettings>
Note that only the ivysettings-public inclusion has changed to include a home made public resolver. Note also that this can be used like that thanks to the fact that ${ivy.default.settings.dir} is a variable which is always set to the place where ivy default settings files are (i.e. packaged in the jar).
To finish this example, you have to write your own ivysettings file (that you will make available at http://myserver/ivy/myivysettings-public.xml in this example) for defining your own public resolver. For instance:
<ivysettings>
<resolvers>
<filesystem name="public">
<ivy pattern="/path/to/my/public/rep/[organisation]/[module]/ivy-[revision].xml" />
<artifact pattern="/path/to/my/public/rep/[organisation]/[module]/[artifact]-[revision].[ext]" />
</filesystem>
</resolvers>
</ivysettings>
Now the last thing you will need in order to properly take advantage of the default settings is the content of each included ivysettings file:
ivysettings-public.xml
<ivysettings>
<resolvers>
<ibiblio name="public" m2compatible="true"/>
</resolvers>
</ivysettings>
ivysettings-shared.xml
<ivysettings>
<property name="ivy.shared.default.root" value="${ivy.default.ivy.user.dir}/shared" override="false"/>
<property name="ivy.shared.default.ivy.pattern" value="[organisation]/[module]/[revision]/[type]s/[artifact].[ext]" override="false"/>
<property name="ivy.shared.default.artifact.pattern" value="[organisation]/[module]/[revision]/[type]s/[artifact].[ext]" override="false"/>
<resolvers>
<filesystem name="shared">
<ivy pattern="${ivy.shared.default.root}/${ivy.shared.default.ivy.pattern}" />
<artifact pattern="${ivy.shared.default.root}/${ivy.shared.default.artifact.pattern}" />
</filesystem>
</resolvers>
</ivysettings>
ivysettings-local.xml
<ivysettings>
<property name="ivy.local.default.root" value="${ivy.default.ivy.user.dir}/local" override="false"/>
<property name="ivy.local.default.ivy.pattern" value="[organisation]/[module]/[revision]/[type]s/[artifact].[ext]" override="false"/>
<property name="ivy.local.default.artifact.pattern" value="[organisation]/[module]/[revision]/[type]s/[artifact].[ext]" override="false"/>
<resolvers>
<filesystem name="local">
<ivy pattern="${ivy.local.default.root}/${ivy.local.default.ivy.pattern}" />
<artifact pattern="${ivy.local.default.root}/${ivy.local.default.artifact.pattern}" />
</filesystem>
</resolvers>
</ivysettings>
ivysettings-main-chain.xml
<ivysettings>
<resolvers>
<chain name="main" dual="true">
<resolver ref="shared"/>
<resolver ref="public"/>
</chain>
</resolvers>
</ivysettings>
ivysettings-default-chain.xml
<ivysettings>
<resolvers>
<chain name="default" returnFirst="true">
<resolver ref="local"/>
<resolver ref="main"/>
</chain>
</resolvers>
</ivysettings>
Here you are, you have enough clues to configure that the way you want... check the settings documentation to see if what you want to do is possible, and go ahead!